Tritech SeaKing 700 Series – Bathymetric & Oceanographic Sensors

The SeaKing bathymetric system comprises up to four high-resolution sensors – a depth sensor, conductivity probe, temperature probe and the PA500 altimeter

Categories: ,

Description

Two standard configurations are available, either as a pressure only package (SeaKing 701) or as a pressure, conductivity and temperature package (SeaKing 704).

The sensors form an integrated package, however, the PA500 altimeter is on a cable and can be mounted separately on the ROV which allows positioning of the individual sensors away from areas of masking or disturbance such as vehicle structure or thruster wash.

With the SeaKing 704, full water column profiling is achieved by dynamically modifying a lookup table which contains all measured parameters versus depth. This table may be stored by the surveyors and re-loaded as required.

The SeaKing Bathymetric System operates as a stand-alone instrument, or a single subsea node on the SeaKing network and shares the same twisted pair wiring as the SeaKing Profiler or SeaKing Sonar. Vehicle integration is very simple since only a single pair of conductors are required on the ROV

Datasheet

tritech-seaking-700-series-bathymetric-oceanographic-sensors

Manual

tritech-seaking-700-series-bathymetric-oceanographic-sensors_hardware_manual

 

Related products

Altimeter MKII

Tritech Altimeter MKII

NR14 3PTU 03_nologo

3xPT

D10-Triple-DyeTector

OceanTools D10 DyeTector®

D9-Diver-DyeTector

OceanTools D9 DyeTector®